[@shanebp Moderator 6 years ago]

Please contact the creator of the BP Xprofile Custom Field Types plugin.

[@shanebp Moderator 6 years ago]

Where is this happening? On your website? If so, please use the support forums for bbPress.

[@shanebp Moderator 6 years, 1 month ago]

Clone your site as a development site and then try updating to the latest version.
If there are major failures that you cannot figure out, then reclone the site and try updating in steps per major releases.
The main point is that you do nothing on the production site until you have updated the de site and are satisfied with the result.

[@shanebp Moderator 6 years, 1 month ago]

> Is this likely to be the source of the issue,

Yes.

To change the slug for the members page, just edit the page you have assigned to members.
Change the slug for that page. You should see it on the right side, under Permalink

[@shanebp Moderator 6 years, 1 month ago]

Again – that is not the default BP behavior.
And I have never seen that behavior, and cannot duplicate it and do not know why it is happening.

To add a link to the BP profile for the logged-in user, go to Appearance > Menus and add a link.
The url for that link is: yoursite.com/members/me/
The me means that it will redirect to the user’s profile page.

[@shanebp Moderator 6 years, 1 month ago]

BP does not take over the home page by default.
Some other code or setting is doing that.

Go to yoursite.com/wp-admin/options-reading.php
and check the settings for Your homepage displays

[@shanebp Moderator 6 years, 1 month ago]

bp_profile_field_data requires that is be used in the context of a member profile or the member loop.

For other cases, use xprofile_get_field_data and note that you need to pass in the user id.
For example, something like:

$user_id = get_current_user_id();
$bpphone = xprofile_get_field_data('Phone', $user_id, 'comma');

xprofile_get_field_data

[@shanebp Moderator 6 years, 1 month ago]

You cannot just add a parameter to the function.
However you can use the action hook to perform additional operations:
do_action( 'bp_activity_add', $r, $activity->id );

[@shanebp Moderator 6 years, 1 month ago]

If you are logged in, you cannot view the reg page, it will redirect you.

[@shanebp Moderator 6 years, 1 month ago]

This will add countries as a dropdown xprofile field.
Just adapt it to your needs.
https://gist.github.com/slaFFik/67e5782da62a2577d1f8

[@shanebp Moderator 6 years, 1 month ago]

buddypress.org is a subsite of wordpress.org – only one person can address that error and they know about it.

[@shanebp Moderator 6 years, 1 month ago]

When you say “run once”

You can run it whenever you want – just don’t leave it in or it will run on every page load.

…in the database _bp_activity all members show the last active date of today

Which is correct if you ran the code above today.
How many member have a row in the database for last_activity ?
Is it 301 ?

[@shanebp Moderator 6 years, 1 month ago]

You could put the questions in the Group Description field.
Or, if the group has a forum, you could create a sticky topic that they will see when they open the forum.
Any other approaches will require writing code – code that is based specific parameters that are TBD.

[@shanebp Moderator 6 years, 1 month ago]

@kriskki – these forums use bbPress, not BuddyPress.
If you have an issue with bbPress forums, please use their support site:
https://bbpress.org/forums/

[@shanebp Moderator 6 years, 1 month ago]

BP is run by volunteers.
Typically, conflicts with other plugins can be difficult to solve.
Especially when you provide so little info.
It is doubtful that one here can help you ( unless they have run into that exact issue themselves ).
Your best approach is to hire an experienced WP developer to look at your site and your specific issue.

[@shanebp Moderator 6 years, 1 month ago]

The code is meant to be used ONCE and then removed.
During that single run, it can be slow depending on the number of members you have.
After you have removed the code, go to Dashboard -> Tools -> BuddyPress then run the Repair total members count.

[@shanebp Moderator 6 years, 1 month ago]

A deprecated notice is usually a warning that it may become an error in the future.
But for the time being it should work.

[@shanebp Moderator 6 years, 1 month ago]

So write a dynamic query to get the ids that you want in include.
I suggest using $wpdb->get_col.

wpdb

[@shanebp Moderator 6 years, 1 month ago]

WP_User_Query has an include parameter:
include (array) – List of users to be included.

WP_User_Query

Gather the ids of the members you want and then use that array for include.

[@shanebp Moderator 6 years, 1 month ago]

If you switch to a WP theme like 2020, does the issue persist?
If not, then the issue is in Avada.

[@shanebp Moderator 6 years, 1 month ago]

These are the forums for BuddyPress, not BuddyBoss.
Please contact BuddyBoss with questions about their products.

[@shanebp Moderator 6 years, 1 month ago]

Use me.
Example: https://yoursite.com/members/me/profile/edit/group/1/
That will send a logged-in user to their profile page > edit.

[@shanebp Moderator 6 years, 1 month ago]

BP does not support docs in groups by default.
You need to find the code that is allowing it on your site.
And then extend that code to allow downloading.

[@shanebp Moderator 6 years, 1 month ago]

Are you using BuddyPress or BuddyBoss ?
Are you using some theme that shows the members in a grid?

You need to find the members loop template and use or add a hook in that template so that you can generate the display of profile data in that area.

[@shanebp Moderator 6 years, 1 month ago]

As you can see on the ticket, an accepted patch exists.
You can either apply the simple patch now or wait until the next BP release which is TBD.