[@shanebp Moderator 11 years, 4 months ago]

Please don’t double post. Your other thread has been deleted.

Unless you are specifically using the bp-default theme, you should create a template overload of this file:
buddypress\bp-templates\bp-legacy\buddypress\members\activate.php
And make your changes there.

[@shanebp Moderator 11 years, 4 months ago]

So instead of a listing of all the groups, you want a dropdown?

Create a template overload of this file:
buddypress\bp-templates\bp-legacy\buddypress\groups\groups-loop.php
And replace the listing layout with a dropdown.

[@shanebp Moderator 11 years, 4 months ago]

Template overloads go in the theme dir, not the plugins dir.
Remove your changes to BP plugin and re-read the codex article.

[@shanebp Moderator 11 years, 4 months ago]

Create a template overload of this file:
buddypress\bp-templates\bp-legacy\buddypress\members\register.php
and adjust the layout.

[@shanebp Moderator 11 years, 4 months ago]

Look at function delete() and function save() in
buddypress\bp-xprofile\classes\class-bp-xprofile-profiledata.php
You’ll find before and after action hooks that you can use to delete or save profile data to usermeta.

[@shanebp Moderator 11 years, 4 months ago]

Looks like a problem in your theme.
Try switching to a theme such as WP 2015 to confirm.

[@shanebp Moderator 11 years, 4 months ago]

Can you create a topic in a group forum front-end if you created the group?

Are the Forum Attribute settings ‘Forum, Open, Public’ in wp-admin > Forums > [some forum] ?

Did you check the settings here: /wp-admin/options-general.php?page=bbpress ?

Are you running any plugins that affect roles / permissions / capabilities ?

Does the same problem occur in a site-wide public forum?

[@shanebp Moderator 11 years, 4 months ago]

Are you talking about Group Forums or site-wide forums?

Are you aware of the bbPress support site?

[@shanebp Moderator 11 years, 4 months ago]

If you’re using phpMyAdmin –
Go to the table, select ‘Structure’, select ‘Change’ for the row ‘id’.
Look thru the options for ‘Auto Increment’ – it may be a checkbox labeled A_I.

[@shanebp Moderator 11 years, 4 months ago]

Re group name length: I was just guessing, since I cannot duplicate the error.
‘Vanhat talot’ is short, so that shouldn’t be the issue.

So you created a group – and the id was 0, correct ?
Then the next group failed due to the duplicate entry 0, correct ?
If so, then the group id field is not being auto-incremented.

The enable_forum field should be 0 if you did not select ‘I want a forum’ when you created the group.
If you did select ‘I want a forum’, which version of bbPress are you using?

[@shanebp Moderator 11 years, 4 months ago]

it creates a group in to the database with id 0

That’s the first thing to solve. The id should be auto-incremented.

There have been some non-BP reports re WP 4.2.2 $wpdb->insert_id returning 0.

How many characters are in your group title?

[@shanebp Moderator 11 years, 4 months ago]

I didn’t know where you were loading the code.
Using the bp_loaded hook allows you to run it from bp-custom.php.

[@shanebp Moderator 11 years, 4 months ago]

Can you create groups on the backend?
/wp-admin/admin.php?page=bp-groups

[@shanebp Moderator 11 years, 4 months ago]

May not be the best way, but try:

function add_group_tab() {

	if ( class_exists( 'BP_Group_Extension' ) ) :
	
		class members_nav_tab_in_group extends BP_Group_Extension {
			
			function __construct() {
			
				if( bp_is_group_single() ) {
					
					$bp = buddypress();
					
					$group_id = $bp->groups->current_group->id;
					
					if( $group_id == 1 ) {
					
						$args = array(
						'slug'              => '../../members',
						'name'              => 'Members Directory',
						'nav_item_position' => 105,
						);
						
						parent::init( $args );
					}
				}
			}
		}
	
	bp_register_group_extension( 'members_nav_tab_in_group' );
	
	endif;

}
add_action( 'bp_loaded', 'add_group_tab' );

[@shanebp Moderator 11 years, 4 months ago]

Sounds like an ajax conflict.
Try deactivating all other plugins.
Then activate them one at a time until the problem occurs.

[@shanebp Moderator 11 years, 4 months ago]

now it does nothing.

So you can see it.
That means that ‘buddypress/bp-members/bp-members-template.php’ is not inactive.

Your description of the problem is so muddled that suggesting a solution is nigh impossible.

Confirm that the issues are not in your theme. Try switching to a standard theme like WP 2013.

[@shanebp Moderator 11 years, 4 months ago]

Look at the BP templates for guidance on those issues.
For example:
buddypress\bp-templates\bp-legacy\buddypress\members\register.php

[@shanebp Moderator 11 years, 4 months ago]

Please use the code button when sharing code.

This is a theme that you are creating?
If not, please ask the theme author.

This looks incorrect:
action="[fn function=" method="post">
No function is stated. And the closing ‘]’ is missing.

[@shanebp Moderator 11 years, 4 months ago]

If buddypress/bp-members/bp-members-template.php is ‘inactive’,
how do you know that ‘the member functions to filter’ are not working?

Have you activated all the components?

Configure BuddyPress

[@shanebp Moderator 11 years, 4 months ago]

all of the plugin files are inactive

What plugin are you talking about?
What do you mean by ‘inactive’?

caused all of the member filter functions to stop working

What member filter functions are you talking about?

It sounds like some custom functions are not working properly.
If so, that is an issue with your custom functions – not BP.

[@shanebp Moderator 11 years, 4 months ago]

BP does create a member_type taxonomy in bp-core/bp-core-taxonomy.php:

register_taxonomy( 'bp_member_type', 'user', array(
   'public' => false,
);

Maybe that’s what you’re seeing.

[@shanebp Moderator 11 years, 4 months ago]

This is the BuddyPress support forum.
Try asking your question on the bbPress support forum.

[@shanebp Moderator 11 years, 4 months ago]

Are you sure it’s BuddyPress and not bbPress?

[@shanebp Moderator 11 years, 4 months ago]

It is possible, but will require custom code.
It sounds like you need to delete both the group and the forum for that group.
If you aren’t a developer, you can post a job listing here.

[@shanebp Moderator 11 years, 4 months ago]

Please use the code button when sharing code.

Nice solution! $aParams [‘type’] = 'unread';